Garmin G2000 Pilots Guide - Page 594
Utilities > Setup, Avionics Status, Database, B-4
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 594 highlights
Appendix B SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS Figure B-4 Standby Navigation Database Update Complete 6) Again, press any key to continue as instructed on the display. Figure B-5 Navigation Database Verification Prompt 7) Press the NO Softkey. The display now starts in normal mode. Since the database effective date is not yet valid, it should not be loaded as the active database. The display now starts in normal mode. Do not remove power while the display is starting. Figure B-6 Active Navigation Database Prompt 8) Press the right most softkey to acknowledge the Power-Up display. 9) From the Home Screen on the Touchscreen Controller, touch Utilities > Setup > Avionics Status. 10) Touch the Database Tab. 11) Touch the PFD1 Button. Verify the PFD1 Database screen indicates the standby navigation database is synchronizing. When synchronization has finished, 'Complete' is displayed. Check the standby navigation database information to verify database have been updated. 12) Touch the Back Button. 580 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A ADDITIONAL FEATURES APPENDICES INDEX