Garmin G2000 Pilots Guide - Page 306

SYSTEM OVERVIEW FLIGHT INSTRUMENTS Flight Management Arrival Button Airport Button Transition Button Runway Button Preview Button Runway Selection Button Arrival Selection Button Transition Selection Button EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES Arrival Sequence Loaded Arrival Load Button Remove Button Figure 5-145 Loading an Arrival into the Active Flight Plan Loading an arrival into the active flight plan using the GDU Controller: 1) Press the PROC Key. The Procedures Window is displayed. 2) Highlight 'SELECT ARRIVAL'. 3) Press the ENT Key or the small PFD Knob. The Select Arrival Window is displayed. 4) Use the PFD Knob to select an airport and press the ENT Key or the small PFD Knob. 5) Select an arrival from the list and press the ENT Key or the small PFD Knob. 6) Select a runway (if required) and press the ENT Key or the small PFD Knob. 7) Select a transition (if required) and press the ENT Key or the small PFD Knob. 'LOAD?' is highlighted. 8) Press the ENT Key or the small PFD Knob to load the arrival procedure. 292 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A APPENDICES INDEX