Garmin G2000 Pilots Guide - Page 21

SYSTTEEMM OVERVIIEEWW FLIGHT INSTRUMMEENTS EEIIS AAUUDD&IIOOCNP&ASCNNESL System Overview Selection softkeys are located along the bottom of the PFD. The softkeys shown depend on the softkey level previously selected. The bezel keys below the softkeys can be used to select the appropriate softkey. There are three types of softkeys. One selects a simple on/off state, indicated by an annunciator on the softkey label displayed as green (on) or gray (off). The next type of softkey selects among several options, indicated by the softkey label changing (with the exception of the Map Range keys) to reflect the name of the chosen option. The last type of softkey, when pressed displays another set of softkeys available for the selected function. Also, these softkeys revert to the previous level after 45 seconds of inactivity. When a softkey function is disabled, the softkey label is subdued (dimmed). NOTE: The MFD softkeys are not used except in reversionary mode and on the MFD Power-Up Display. Selected Function Off Softkey Names (FMS selected for the CDI) Bezel-Mounted Softkeys (Press) Subdued Softkey (function unavailable) Full Mode PFD Softkeys Split Mode PFD Softkeys Figure 1-6 Top Level PFD Softkeys Each softkey sublevel has a BACK Softkey which can be selected to return to the previous level. FLIGHT MANAGEEMMEENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 7