Garmin G2000 Pilots Guide - Page 411

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Hazard Avoidance Clearing the Stormscope pane removes any previously displayed cell or lightning strike information from the Navigation Map pane and the PFD Inset Navigation Map. Clearing Stormscope information on the Navigation Map Pane: 1) From Home, touch Map > Map Settings. 2) If necessary, touch the Sensor Tab. 3) Scroll as needed and touch the Stormscope Lightning Settings Button. 4) Touch the Clear Stormscope Lightning Button. Selecting a maximum Stormscope map range for the Navigation Map Pane: 1) From Home, touch Map > Map Settings. 2) If necessary, touch the Sensor Tab. 3) Scroll as needed and touch the Stormscope Lightning Settings Button. 4) Touch the Map Settings Button. 5) Touch the Stormscope range button (current range setting displayed in light blue). 6) Scroll as needed and touch to select the maximum map range to display lighting information. Abnormal Operations If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn. This is to ensure that the strike and/or cell positions are depicted accurately in relation to the nose of the aircraft. Refer to the previous procedures 'Clearing Stormscope information on the Navigation Map Pane' or 'Clearing Stormscope Information on the Stormscope Pane' to clear Stormscope information from the selected map. AUDIO & CNS FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 397