Garmin G2000 Pilots Guide - Page 568

SYSTEM OVERVIEW FLIGHT INSTRUMENTS Appendix A G2000 System Annunciations When the system issues a message, the 'MSG' annunciator flashes on the PFD and a MSG Button flashes on the Touchscreen Controller to alert the pilot of a new message. The annunciator and button continue to flash until acknowledged by touching the MSG Button on the Touchscreen Controller. Active messages are displayed in white text. Messages that have become inactive change to gray text. The 'MSG' annunciator flashes if the state of a displayed alert changes or a new message is displayed. The G2000 System Messages convey messages to the pilot regarding problems with the G2000 system. When an LRU or an LRU function fails, a red or yellow 'X' is typically displayed on items associated with the failed data. The color of the 'X' is dependent on the LRU. The following section describes various system annunciations. Refer to the Airplane Flight Manual (AFM) for additional information regarding pilot responses to these annunciations. NOTE: Upon power-up of the system, certain windows remain invalid as the equipment begins to initialize. All windows should be operational within one minute of power-up. If any window continues to remain flagged, the system should be serviced by a Garmin-authorized repair facility. System Message/ Aircraft Advisory Message Notification System Annunciations appear as Yellow or Red 'X' EIS AUDIO & CNS AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX . 554 Figure A-6 System Messages and System Annunciations Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A