Garmin G2000 Pilots Guide - Page 213

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE Flight Management Airways may be displayed on the map at the pilot's discretion using the Touchscreen Controller. The airway range can also be programmed to only display airways on the MFD when the map range is at or below a specific value. Displaying/removing airways: 1) From Home, touch Map > Map Settings. 2) Touch the Aviation Tab, if necessary. 3) Touch the Low Altitude Airways Button to display/remove the low altitude airways. 4) Touch the High Altitude Airways Button to display/remove the high altitude airways. Range Button Low Altitude Airways Button High Altitude Airways Button Figure 5-22 Map Options Screen - Airways Setup Range Selection Button The airway range is the maximum map range on which airways are displayed. Selecting an airway range: 1) From Home, touch Map > Map Settings. 2) Touch the Aviation Tab, if necessary. 3) Touch the low altitude or high altitude range button to display the range selection buttons. 4) Touch a range selection button to select the maximum map display range.The following range items are configurable on the airways menu. Airway Type Airway Symbol/Line Highlighted Airway Default Maximum Information Box Range (nm) Range (nm) Low Altitude Airway 50 250 High Altitude Airway Table 5-4 Airway Range Information 50 250 HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 199