Garmin G2000 Pilots Guide - Page 490

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT Automatic Flight Control System 5) As the aircraft nears the VNAV Target Altitude, the flight director transitions to VNAV Target Altitude Capture Mode, indicated by the green 'ALTV' annunciation flashing for up to 10 seconds.  The green 'ALT' annunciation flashes for up to 10 seconds upon reaching 50 feet from the VNAV Target Altitude; the autopilot transitions to Altitude Hold Mode and levels the aircraft at the vertical waypoint. VPTH Mode BOD ALT Mode 1 2 FLC Mode Selected Altitude of 9,400 MSL Planned TOD VNAV Target Altitude of 10,000 MSL 3 Planned Descent Path ALT Mode TOD 4 VPTH Mode VNAV Target Altitude of 9,000 MSL 5 BOD ALT Mode OPSHN 3 nm Selected Altitude HABUK Figure 7-36 Non-path Descent Approach Flying an ILS approach: 1) Transition from FMS Navigation Mode to Heading Select Mode. a) Select the Runway 35L ILS approach for KCOS and select 'VECTORS' for the transition. Load and activate the approach into the flight plan. b) Use the HDG Knob to set the Selected Heading after getting vectors from ATC. c) Press the HDG Key. The autopilot turns the aircraft to the desired heading. d) Use Heading Select Mode to comply with ATC vectors as requested. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 476 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A