Garmin G2000 Pilots Guide - Page 448

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AVOIDANCE MANAGEMENT AUDIO & CNS Hazard Avoidance 4) Touch the Map Settings Button. 5) Touch the Labels Button to enable/disable the display of labels on traffic (such as relative altitude). 6) To change the map range above which the system removes traffic symbols from the map, touch the Symbols Range Button, then scroll to and touch to select a map range above which the system will remove the traffic symbols. 7) To change the map range at which the system removes traffic labels from the map, touch the Labels Range button, then scroll to and touch to select a map range above which the system removes traffic labels from the map. 8) When finished, touch the Back or Home. System Status The traffic mode appears in the upper right corner of the Traffic Map Pane. Mode TAS System Test Initiated Traffic Mode Annunciation (Traffic Map Pane) TEST (TEST MODE shown in top center of Traffic Map display) Traffic Display Status Icon (Other Maps) TAS Operating OPERATING TAS Standby STANDBY (also shown in center of Traffic Map display) TAS Failed* FAIL * See Table 6-26 for additional failure annunciations Table 6-25 Traffic Modes If the traffic unit fails, the system shows an annunciation as to the cause of the failure in the center of the Traffic Map Pane. During a failure condition, the Operating Mode is not available. Traffic Map Page Center Annunciation NO DATA DATA FAILED FAILED Description System is not receiving any data from the TAS unit. System is receiving data from the TAS unit, but the unit is reporting a failure. The TAS unit is sending invalid data to the system. Table 6-26 Traffic Failure Annunciations FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 434 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A