Garmin G2000 Pilots Guide - Page 28

SyStem overview SyStem overview toucHScreen controller The Touchscreen Controller is a pedestal-mounted user interface allowing for ease of data entry, MFD/Display Pane operation, NAV/COM tuning. The touchscreen uses an infrared grid to determine the location of the touch input and also allows usage with gloves or stylus. Many procedures in this Pilot's Guide are performed using the Touchscreen Controller. Radio tuning can be accomplished using the CNS Bar at the top of the Touchscreen Controller screen (refer to the Audio and CNS Section for detailed information about NAV/COM tuning). FliGHt inStrumentS eiS aauuDDi&ioocpn&aScnenlS FliGHt manaGement HaZarD avoiDance aFcS 1 2 3 4 7 5 8 6 9 Figure 1-11 GTC 570 Touchscreen Controller 1 CNS Bar 2 Screen Title 3 Screen 4 Button Bar 5 Label Bar 6 Joystick 7 Middle Knob 8 Large Right Knob 9 Small Right Knob Displays/controls COM, NAV, XPDR, and Intercom functions Displays the title of the current screen Displays set context sensitive controls and data Displays System level buttons (e.g. Home, MSG, Full/Half, Scroll Up/Down, Back, Enter, Cancel) Displays labels to show status and current functions of Joystick and knobs Provides functions as shown on the Label Bar (e.g. Map Panning, Map Range) Provides functions as shown on the Label Bar (e.g. COM volume/squelch) Provides functions as shown on the Label Bar (e.g. COM Freq/switching, Data Entry) Provides functions as shown on the Label Bar (e.g. COM Freq/switching/Hold, Data Entry) 14 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A aDDitional FeatureS appenDiceS inDeX