Garmin G2000 Pilots Guide - Page 180

SySteM overview FligHt inStruMentS eiS Audio & cnS Audio And cnS cleArAnce recorder And plAyer The Audio Controller contains a digital clearance recorder that records up to 2.5 minutes of the selected COM radio signal. Recorded COM audio is stored in separate memory blocks. Once 2.5 minutes of recording time have been reached, the recorder begins recording over the stored memory blocks, starting from the oldest block. Touching the Recorder (Play) Button plays the latest recorded memory block. The Recorder (Stop) Button is displayed while the audio is playing. When the present memory block has finished playing the Recorder (Play) Button is displayed again. Touching the Recorder (Stop) Button during play of a memory block stops play. If a COM input signal is detected during play of a recorded memory block, play is halted. Touching the Previous button begins playing the previously recorded memory block. Each subsequent press of the Previous button selects the previously recorded memory block, if any more exist. Touching the Next button begins playing the next recorded memory block. Each subsequent press of the Next button selects the next recorded memory block, if any more exist. Powering down the system automatically clears all recorded blocks. Audio & Radios Button Recorder Button Stop Play Recorder Volume Slider Audio Playback Controls Play next block Play previous block Figure 4-56 Recorder Controls Recorder Volume Knob Label FligHt MAnAgeMent HAZArd AvoidAnce AFcS AdditionAl FeAtureS AppendiceS indeX 166 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A