Garmin G2000 Pilots Guide - Page 90

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT Flight Instruments Bearing Pointers and Information Windows Two bearing pointers and associated information can be displayed on the HSI for NAV, FMS, and ADF sources by pressing the PFD Settings Softkey then the Bearing 1 or Bearing 2 Softkey. The bearing pointers are light blue and are single-line (Bearing 1) or double-line (Bearing 2). A pointer symbol is shown in the information windows to indicate the navigation source. The bearing pointers never override the CDI and are visually separated from the CDI by a white ring. Bearing pointers may be selected but not necessarily visible due to data unavailability. Note: ADF radio installation is optional. Tuning Mode Bearing 1 Pointer Frequency Distance Distance to Bearing Source Bearing 2 Pointer Station Identifier Bearing Source 1 Bearing Source 2 Figure 2-21 HSI with Bearing and Distance Information When a bearing pointer is displayed, its associated information window is also displayed. The Bearing Information windows (Figure 2-21) are displayed to the lower sides of the HSI and display the following information: • Bearing source (NAV, FMS, ADF) • Pointer icon (Bearing 1 = single line, Bearing 2 = double line) • Frequency (NAV, ADF) • Station/waypoint identifier (NAV, FMS) • GPS-derived great circle distance to bearing source When the NAV radio is tuned to an ILS frequency the bearing source and the bearing pointer is removed from the HSI. When NAV1 or NAV2 is the selected bearing source, the frequency is replaced by the station identifier when the station is within range. If FMS is the bearing source, the active waypoint identifier is displayed in lieu of a frequency. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 76 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A