Garmin G2000 Pilots Guide - Page 226

SYSTEM OVERVIEW FLIGHT INSTRUMENTS Flight Management runway length and/or surface type can be entered to prevent airports with small runways or runways that are not appropriately surfaced from being displayed. Default settings are 0 feet (or meters) for runway length and "HARD/SOFT" for runway surface type. Selecting nearest airport surface matching criteria: 1) From Home, touch Utilities > Setup > Avionics Settings. 2) Touch the System Tab, if necessary. 3) Scroll the list to display the Nearest Airport Runway Surface Button. 4) Touch the Nearest Airport Runway Surface Button to display the surface choices. 5) Touch a surface selection button to set the surface criteria. System Tab Nearest Airport Runway Surface Button Surface Selection Button EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES Figure 5-44 Nearest Airport Runway Surface Selection Selecting nearest airport minimum runway length matching criteria: 1) From Home, touch Utilities > Setup > Avionics Settings. 2) Touch the System Tab, if necessary. 3) Scroll the list to display the Nearest Airport Min Rwy Length Button. 4) Touch the Nearest Airport Min Rwy Length Button to display the keypad. 5) Use the keypad to enter the minimum length. 6) Touch the Enter Button to accept the length criteria. System Tab Nearest Airport Min Rwy Length Button 212 Figure 5-45 Nearest Airport Runway Length Selection Garmin G2000 Pilot's Guide for the Cessna T240 Runway Length Entry 190-01263-01 Rev. A APPENDICES INDEX