Garmin G2000 Pilots Guide - Page 83
Altimeter
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE Flight Instruments Altimeter The Altimeter displays 600 feet of barometric altitude values at a time on a moving tape rolling number gauge. Numeric labels and major tick marks are shown at intervals of 100 feet. Minor tick marks are at intervals of 20 feet. The current altitude is displayed in the black pointer. The Selected Altitude is displayed above the Altimeter in the box indicated by a selection bug symbol. A bug corresponding to this altitude is shown on the tape. If the Selected Altitude exceeds the range shown on the tape, the bug appears at the corresponding edge of the tape. When the metric value is selected it is displayed in a separate box below the Selected Altitude. A magenta Altitude Trend Vector extends up or down the left of the altitude tape, the end resting at the approximate altitude to be reached in 6 seconds at the current vertical speed. The trend vector is not shown if altitude remains constant or if data needed for calculation is not available due to a system failure. Setting the Selected Altitude: Turn the ALT Knob on the GMC 720 AFCS Controller to set the Selected Altitude in 100-ft increments. When meters are displayed, Selected Altitude is adjusted in 50 meter increments.. If set, the Minimum Descent Altitude/Decision Height (MDA/DH) value is also available for the Selected altitude. Selected Altitude Selected Altitude (Meters) Selected Altitude Bug Altitude Trend Vector Current Altitude Current Altitude (Meters) MDA/DH Bug Barometric Setting Figure 2-9 Altimeter Barometric Setting Box (Hectopascals) Figure 2-10 Altimeter (Metric) Altitudes can also be displayed in meters (Figure 2-10). Note that the altitude tape does not change scale. Displaying altitude in meters: 1) Select the PFD Settings Softkey to display the second-level softkeys. 2) Select the Other PFD Settings Softkey. 3) Select the Altitude Units Softkey. 4) Select the Meters Softkey to turn on metric altitude readouts. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 69