Garmin G2000 Pilots Guide - Page 389

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS FLIGHT MANAGEMENT Hazard Avoidance Connext Weather Data Requests The Data Request Window on the Connext Weather Settings Screen provides the flight crew with the options to select the size of weather data request coverage area, choose automatic weather update intervals (if desired), and the ability to send or cancel weather data requests. The Data Request Window also displays the status of the weather data request process. Before a weather data request can occur, a valid request coverage area must be defined from which all currently available Garmin Connext Weather products will be retrieved (regardless of which weather products are currently enabled for display). At a minimum, either the aircraft's present position or a waypoint (as part of a flight plan or entered directly in the 'Waypoint' coverage field) must be part of the request coverage area, otherwise the Data Request Window indicates 'Invalid Coverage Area' and the system will not allow a request to occur. It is not necessary for a destination (based on an active flight plan), a flight plan, or waypoint to be defined prior to enabling these coverage areas; however no weather data will be retrieved for these option(s) until a flight plan or waypoint is provided, respectively. Defining Weather Data Request Coverage Area: 1) From Home, touch Weather > Weather Selection > Connext Weather > Connext Settings. 2) Touch the Define Coverage Button. 3) To change the diameter and route width of the weather data request coverage area, touch the Diameter/ Width Button. Scroll as needed and touch the desired distance button in the popup window. 4) To include/remove the present position in the weather data request, touch the P. POS Button. 5) To include/remove any portion of the flight plan route in the weather data request, touch the Flight Plan Button. 6) To change distance of the flight plan to be used in the weather data request, touch the Flight Plan Distance Button. Scroll as needed and touch the desired distance of the flight plan to be used ('Remining FPL' uses the remainder of the flight plan, or select a specified look-ahead distance from the list.) 7) To include/remove a specific waypoint to be used in the weather data request, touch the Waypoint Button. a) Touch the waypoint entry Button (to the right of the Waypoint Button.) b) Using the Touchscreen Controller buttons or knobs, enter a waypoint to include in the weather data request. Note the waypoint may be off-route. Issuing/Cancelling an Immediate Weather Data Request:. 1) From Home, touch Weather > Weather Selection > Connext Weather > Connext Settings. 2) Touch the Send Immediate Request Button. The system contacts Garmin Connext weather services and displays the request status in the Data Request Window. Window displays 'Completed' when finished. 3) If desired, touch the Cancel Immediate Request Button while a request is occurring. Data Request Window displays 'Request Cancelled'. HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 375