Garmin G2000 Pilots Guide - Page 262

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Flight Management Note: If the imported flight plan contains a waypoint with a name that duplicates the name of a waypoint already stored on the system, the system compares the coordinates of the imported waypoint with those of the existing waypoint. If the coordinates are different, the imported waypoint is automatically renamed by adding characters to the end of the name. Exporting a stored Flight Plan to an SD Card 1) Insert the SD card for storing the flight plan in the top card slot on the MFD. 2) From Home, touch Flight Plan > Flight Plan Options 3) Touch the Catalog Button to display the Flight Plan Catalog Screen. 4) Touch a flight plan selection button to display the Catalog Options Window. 5) Touch the Export Button to display the Export Flight Plan Screen. 6) Touch the File Name: Button to rename the exported flight plan using the keypad or right knob, if necessary. 7) Touch the Export Button. 8) Touch the OK Button in response to the "Flight Plan Successfully Exported." prompt to return to the Flight Plan Options Screen. Note: The exported flight plan will not contain any procedures or airways. Catalog Button Flight Plan Selection Button Export Button & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX Export Button 248 Figure 5-88 Stored Flight Plan Export Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A