Garmin G2000 Pilots Guide - Page 575
Gdc 74a Air Data Computer System Messages, Adc1 Alt Ec, Adc1 Service
![]() |
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 575 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS FLIGHT MANAGEMENT AVOIDANCE Appendix A System Message Comments GPS1 FAIL - GPS1 is inoperative. GPS2 FAIL - GPS2 is inoperative. A failure has been detected in GPS receiver #1 and/or GPS receiver #2. The system should be serviced. NAV1 SERVICE - NAV1 needs service. Return unit for repair. NAV2 SERVICE - NAV2 needs service. Return unit for repair. A failure has been detected in the NAV1 and/or NAV2 receiver. The receiver may still be available. The system should be serviced. NAV1 RMT XFR - NAV1 remote transfer key is stuck. NAV2 RMT XFR - NAV2 remote transfer key is stuck. The remote NAV1 and/or NAV2 transfer switch is stuck in the enabled (or "pressed") state. Press the transfer switch again to cycle its operation. If the problem persists, the system should be serviced. G/S1 FAIL - G/S1 is inoperative. A failure has been detected in glideslope receiver 1 and/or receiver 2. The system should be G/S2 FAIL - G/S2 is inoperative. serviced. G/S1 SERVICE - G/S1 needs service. Return unit for repair. G/S2 SERVICE - G/S2 needs service. Return unit for repair. NAV1 MANIFEST - NAV1 software mismatch, communication halted. NAV2 MANIFEST - NAV2 software mismatch, communication halted. A failure has been detected in glideslope receiver 1 and/or receiver 2. The receiver may still be available. The system should be serviced when possible. The NAV 1 and/or NAV 2 has incorrect software installed. The system should be serviced. GDC 74A Air Data Computer System Messages System Message GDC1 MANIFEST - GDC 1 software mismatch, communication halted. ADC1 ALT EC - ADC1 altitude error correction is unavailable. ADC1 AS EC - ADC1 airspeed error correction is unavailable. ADC1 SERVICE - ADC1 needs service. Return unit for repair. Comments The GDC 74A has incorrect software installed. The system should be serviced. GDC1 is reporting the altitude error correction is unavailable. GDC1 is reporting the airspeed error correction is unavailable. The GDC74A should be serviced.. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 561
![](/manual_guide/products/garmin-g2000-pilots-guide-b2a7ad8/575.png)