Garmin G2000 Pilots Guide - Page 414

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AVOIDANCE MANAGEMENT AUDIO & CNS Hazard Avoidance Profile Path The Profile Path displays the horizontal and lateral boundaries of the Profile View. The path is shown as a white rectangle on the Navigation Map Pane (Figure 6-80) and is only available when Profile View is enabled. Two white range markers appear on the inside of the Profile Path rectangle match the range markers along the distance scale inside the Profile View Inset Window whenever the profile range is at least 4 nm (or 7.5 km if configured for metric units). The Profile Path rectangle may be selected on or off. In addition, the maximum map range to display the Profile Path is selectable. Customizing the Profile Path display on the Navigation Map Pane: 1) From Home, touch Map > Map Settings. 2) If necessary, touch the Inset Window tab. 3) Touch the Profile Settings Button. 4) Touch the Profile Path Button to enable/disable the display of the profile path. 5) Touch the Profile Path range button. 6) Scroll as needed and touch a button for the desired maximum map range for the system to display the profile view path (above this range, the system will remove the profile view path from the map.) 7) When finished, touch Back or Home. Figure 6-81 Customizing the Profile View Settings FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 400 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A