Home » Garmin Manuals » GPS » Garmin G2000 » Manual Viewer

Garmin G2000 Pilots Guide - Page 255

VNAV Offset, VNAV Altitude

View all Garmin G2000 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 255 highlights

Flight Management SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE HAZARD Course Selection Using Touchscreen Controller Using GDU Controller on PFD Figure 5-81 Direct To - Selecting a Manual Course Reselecting the direct course from the current position: 1) From Home, touch Direct To. 2) Touch the Activate ¯ Button to activate the direct-to using the direct course. Or: 1) On the GDU Controller, press the ¯ Button to display the Direct To Window. 2) Press the ENT Key or the small PFD Knob to accept the selection and move the cursor to the ACTIVATE? field. 3) Press the ENT Key or the small PFD Knob to activate the direct-to using the direct course. A direct-to with altitude constraints creates a descent path (and provides guidance to stay on the path) from the aircraft's current altitude to the altitude of the direct-to waypoint. The altitude is reached at the waypoint, or at the specified distance along the flight path if an offset distance has been entered. All VNAV altitudes prior to the direct-to destination are removed from the active flight plan upon successful activation of the direct-to. All VNAV altitudes following the direct-to waypoint are retained. See the section on Vertical Navigation for more information regarding the use and purpose of VNAV altitudes and offset distances. Entering a VNAV altitude and along-track offset for the waypoint: 1) From Home, touch Direct To. 2) Touch the VNAV Altitude Button to display the keypad. 3) Use the keypad to select the altitude. 4) Touch the Enter Button to accept the altitude, and and return to the Direct To Screen. 5) Touch the VNAV Offset Button to display the keypad. 6) Touch the (Before) - Button or the (After) + Button, if necessary. 7) Use the keypad to select the offset distance. 8) Touch the Enter Button to accept the offset distance, and and return to the Direct To Screen. 9) Touch the Activate ¯ Button to activate the direct-to using the VNAV constraints. Or: 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 241 AFCS ADDITIONAL FEATURES APPENDICES INDEX

Section	Page
Section 1 System overview	15
1.1 System Description	15
1.2 System Power-up	18
1.3 G2000 Controls	20
PFD Controls	20
GDU Controller	26
Touchscreen Controller	28
1.4 System Operation	48
Normal Display Operation	48
Reversionary Display Operation	49
Touchscreen Controller Failure	50
AHRS Operation	50
GPS Receiver Operation	51
G2000 System Annunciations	55
1.5 System Management	56
Avionics Settings	56
Environmental Control Settings	64
Avionics Status	66
SiriusXM Information	67
System Tests	68
1.6 Utilities	69
Timer	69
Trip Stats	70
Screen Cleaning	73
Crew Profiles	73
1.7 Secure Digital Cards	76
Section 2 Flight Instruments	77
2.1 Flight Instruments	80
Airspeed Indicator	80
Attitude Indicator	82
Altimeter	83
Vertical Speed Indicator (VSI)	85
Vertical Deviation	86
Horizontal Situation Indicator (HSI)	87
Course Deviation Indicator (CDI)	92
2.2 Garmin SVT™ (Synthetic Vision Technology)	99
SVT Operation	100
SVT Features	101
Field of View	110
2.3 Supplemental Flight Data	111
Temperature Displays	111
Wind Data	112
Vertical Navigation (VNV) Indications	113
2.4 PFD Annunciations and Alerting Functions	114
System Alerting	114
Marker Beacon Annunciations	115
Traffic Annunciation	115
Terrain Annunciations	116
Altitude Alerting	116
Low Altitude Annunciation	117
Minimum Descent Altitude/Decision Height Alerting	117
2.5 Abnormal Operations	119
Abnormal GPS Conditions	119
Unusual Attitudes	120
Garmin SVT Troubleshooting	120
SVT Unusual Attitudes	121
Section 3 Engine Indication System	123
3.1 EIS Display	125
Engine Parameters	126
3.2 Aircraft Systems	131
System Tests	131
Engine/Systems Display	131
Fuel Calculations Screen	133
Engine Lean Assist Mode	134
Supplemental Oxygen System	134
Section 4 Audio and CNS	135
4.1 Overview	135
PFD COM/NAV display and Controls	136
Touchscreen Controller Audio and CNS Controls	138
4.2 COM Operation	140
COM Transceiver Selection and Activation	140
COM Frequency Tuning	142
Frequency Spacing	149
Automatic Squelch	150
Volume	151
4.3 NAV Operation	152
NAV Radio Selection and Activation	152
NAV Receiver Tuning	153
Marker Beacon Receiver	161
ADF/DME Tuning	163
4.4 GTX 33 Mode S Transponder	168
Transponder Controls	168
Transponder Mode Selection	168
Entering a Transponder Code	171
IDENT Function	172
4.5 Additional Audio Functions	173
Mono/Stereo Headsets	173
Speaker	173
Intercom	174
Clearance Recorder and Player	180
Simultaneous COM Operation	181
3D Audio	182
Entertainment Inputs	184
4.6 Abnormal Operation	186
Stuck Microphone	186
COM Tuning Failure	186
Emergency Mode	187
Audio Controller Fail-Safe Operation	187
Section 5 Flight Management	189
5.1 Introduction	189
Navigation Status Bar	191
5.2 Using Map Displays	193
Map Settings Sync	193
Map Orientation	194
Map Range	195
Map Panning	198
Topography	203
Map Symbols	206
Airways	212
Track Vector	214
Wind Vector	215
Fuel Range Ring	216
Field of View (SVS)	217
Selected Altitude Intercept Arc	218
Obstacles	219
5.3 Waypoints	220
Airports	221
Intersections	227
NDBs	230
VORs	233
User Waypoints	236
5.4 Airspaces	244
5.5 Direct-to Navigation	248
5.6 Flight Planning	257
Flight Plan Creation	258
Adding Waypoints to an Existing Flight Plan	263
Adding Airways to a Flight Plan	267
Adding Procedures to a Stored Flight Plan	270
Flight Plan Storage	277
Flight Plan Editing	279
Along Track Offsets	282
Parallel Track	284
Activating a Flight Plan Leg	286
Inverting a Flight Plan	287
Closest Point of FPL	289
User-Defined Holding Patterns	290
5.7 Vertical Navigation	294
Altitude Constraints	298
5.8 Procedures	301
Departures	301
Arrivals	305
Approaches	308
5.9 Trip Planning	317
Trip Planning	317
5.10 Navigating a Flight Plan	321
5.12 Abnormal Operation	345
Section 6 Hazard Avoidance	347
6.1 SiriusXM Weather	348
Activating Services	348
Accessing SiriusXM Weather Products	349
6.2 Garmin Connext Weather	381
Registering the system for Garmin Connext Services	381
Accessing Connext Weather Products	382
Connext Weather Data Requests	389
Garmin Connext Weather Products	393
Abnormal Operations	406
6.3 Lightning Detection System	407
Using the Stormscope Pane	408
Displaying Lightning Information on Navigation Maps	409
Abnormal Operations	411
6.4 Profile View Terrain	412
Profile View Display	412
6.5 Terrain SVT	415
Displaying Terrain SVT Data	416
Terrain SVT Pane	418
6.6 TAWS	425
Displaying TAWS Information	426
TAWS Pane	428
TAWS Alerts	429
System Status	437
TAWS Abnormal operations	437
6.7 GTS 800 Traffic	439
Theory of operation	439
Traffic Alerts	442
Operation	443
Section 7 Automatic Flight Control System	451
Basic Autopilot Operation	452
7.1 AFCS Controls	453
7.2 Flight Director Operation	455
Activating the Flight Director	455
AFCS Status Box	456
Command Bars	456
Flight Director Modes	457
7.3 Vertical Modes	458
Pitch Hold Mode (PIT)	459
Selected Altitude Capture Mode (ALTS)	460
Altitude Hold Mode (ALT)	461
Vertical Speed Mode (VS)	462
Flight Level Change Mode (FLC)	463
Vertical Navigation Modes (VPTH, ALTV)	464
Glidepath Mode (GP) (SBAS Only)	468
Glideslope Mode (GS)	470
Go Around Mode (GA)	471
Level Mode (LVL)	471
7.4 Lateral Modes	472
Roll Hold Mode (ROL)	473
Heading Select Mode (HDG)	474
Navigation Modes (FMS, VOR, LOC,)	475
Approach Modes (FMS, VAPP, LOC)	477
Backcourse Mode (BC)	478
Level Mode (LVL)	479
7.5 Autopilot Operation	480
Engaging the Autopilot	480
Control Wheel Steering	481
Disengaging the Autopilot	481
7.6 Example Procedures	482
Departure	483
Intercepting a VOR Radial	485
Flying a Flight Plan/FMS Course	486
Descent	486
Approach	490
Go Around/Missed Approach	494
7.7 AFCS Annunciations and Alerts	496
AFCS Status Alerts	496
Overspeed Protection	497
Underspeed Protection	497
Section 8 Additional Features	499
8.1 SafeTaxi	500
SafeTaxi Database Information	502
8.2 ChartView (Optional)	504
Chart Selection	505
Day/Night View	507
ChartView Database Information	509
8.3 FliteCharts	512
Chart Selection	513
Day/Night View	515
FliteCharts Cycle Number and Expiration Date	517
8.4 Airport Directory	520
Airport Directory Database Cycle Number and Revision	521
8.5 SiriusXM Satellite Radio (Optional)	523
Activating SiriusXM Satellite Services	523
Using SiriusXM Radio	525
8.6 Satellite SMS Messaging Service	529
Registering With Connext	529
Contacts	530
Text Messaging (SMS)	533
8.7 Electronic Stability and Protection	542
Operation	543
8.8 Auxiliary Video (Optional)	545
8.9 Scheduled Messages	547
8.10 Electronic Documents	551
Installed Documents	551
User Documents	551
Viewing Electronic Documents	552
8.11 Flight Data Logging	556
8.12 Electronic Checklists (Optional)	558
8.13 Abnormal Operation	561
Appendices	563
Annunciations and Alerts	563
Comparator Annunciations	566
Reversionary AHRS Sensor Annunciation	567
G2000 System Annunciations	568
System Messages and Aircraft Message Advisories	570
Voice Alerts	585
AFCS Status Annunciations	586
Terrain Alerts and Annunciations	587
GDL 69/69A Data Link Receiver Annunciations	589
Database Management	591
Jeppesen Databases	591
Automatic Database Synchronization Feature	595
Garmin Databases	597
Magnetic Field Variation Database Update	599
Glossary	603
Frequently Asked Questions	609
Map Symbols	613
Index	617
Index	617

Match case Limit results 1 per page

190-01263-01

Rev. A

Garmin G2000 Pilot’s Guide for the Cessna T240

241

FLIGHT MANAGEMENT

SYSTEM

OVERVIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO PANEL

& CNS

FLIGHT

MANAGEMENT

HAZARD

AVOIDANCE

AFCS

ADDITIONAL

FEATURES

APPENDICES

INDEX

Figure 5-81

Direct To - Selecting a Manual Course

Course

Selection

Using Touchscreen Controller

Using GDU Controller on PFD

Reselecting the direct course from the current position:

From

Home

, touch

Direct To.

Touch the

Activate

Button to activate the direct-to using the direct course.

Or:

On the GDU Controller, press the

Button to display the Direct To Window.

Press the

ENT

Key or the small

PFD

Knob to accept the selection and move the cursor to the

ACTIVATE?

ﬁeld.

Press the

ENT

Key or the small

PFD

Knob to activate the direct-to using the direct course.

direct-to with altitude constraints creates a descent path (and provides guidance to stay on the path) from

the aircraft’s current altitude to the altitude of the direct-to waypoint.

The altitude is reached at the waypoint, or

at the speciﬁed distance along the ﬂight path if an offset distance has been entered.

All VNAV altitudes prior to

the direct-to destination are removed from the active ﬂight plan upon successful activation of the direct-to.

All

VNAV altitudes following the direct-to waypoint are retained.

See the section on Vertical Navigation for more

information regarding the use and purpose of VNAV altitudes and offset distances.

Entering a VNAV altitude and along-track offset for the waypoint:

From

Home

, touch

Direct To.

Touch the

VNAV Altitude

Button to display the keypad.

Use the keypad to select the altitude.

Touch the

Enter

Button to accept the altitude, and and return to the Direct To Screen.

Touch the

VNAV Offset

Button to display the keypad.

Touch the

(Before) -

Button or the

(After) +

Button, if necessary.

Use the keypad to select the offset distance.

Touch the

Enter

Button to accept the offset distance, and and return to the Direct To Screen.

Touch the

Activate

Button to activate the direct-to using the VNAV constraints.

Or: