Garmin G2000 Pilots Guide - Page 580
Gmc 720 Afcs Controller System Messages, Miscellaneous System Messages, Fpl Wpt Lock
![]() |
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 580 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS AVOIDANCE MANAGEMENT FLIGHT Appendix A System Message DIG GMA1 MANIFEST - Software mismatch, communication halted. GMA1 SERVICE - GMA1 needs service. Return unit for repair. Comments The audio controller has incorrect software installed. The system should be serviced. The audio controller self-test has detected a problem in the unit. Certain audio functions may still be available, and the audio controller may still be usable. The system should be serviced when possible. GMC 720 AFCS Controller System Messages System Message GMC CONFIG - GMC Config error. Config service req'd. GMC FAIL - GMC is inoperative. GMC MANIFEST - GMC software mismatch. Communication halted. GMC KEYSTK - GMC [key name] key is stuck. Comments Error in the configuration of the GMC 720. A failure has been detected in the GMC 720. The GMC 720 is unavailable. The GMC 720 has incorrect software installed. The system should be serviced. A key is stuck on the GMC 720 bezel. Attempt to free the stuck key by pressing it several times. The system should be serviced if the problem persists. Miscellaneous System Messages System Message FPL WPT LOCK - Flight plan waypoint is locked. FPL WPT MOVE - Flight plan waypoint moved. TIMER EXPIRD - Timer has expired. DATABASE CHANGE - Database changed. Verify user modified procedures. DATABASE CHANGE - Database changed. Verify stored airways. FPL TRUNC - Flight plan has been truncated. Comments Upon power-up, The system detects that a stored flight plan waypoint is locked. This occurs when an aviation database update eliminates an obsolete waypoint. The flight plan cannot find the specified waypoint and flags this message. This can also occur with user waypoints in flight plans that are deleted. Remove the waypoint from the flight plan if it no longer exists in any database, or update the waypoint name/identifier to reflect the new information. The system has detected that a waypoint coordinate has changed due to a new navigation database update. Verify that stored flight plans contain correct waypoint locations. The system notifies the pilot the timer has expired. This occurs when a stored flight plan contains procedures that have been manually edited. This alert is issued only after a navigation database update. Verify the user-modified procedures in stored flight plans are correct and current. This occurs when a stored flight plan contains an airway that is no longer consistent with the navigation database. This alert is issued only after a navigation database update. Verify use of airways in stored flight plans and reload airways as needed. This occurs when a newly installed navigation database eliminates an obsolete approach or arrival used by a stored flight plan. The obsolete procedure is removed from the flight plan. Update flight plan with current arrival or approach. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 566 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A
![](/manual_guide/products/garmin-g2000-pilots-guide-b2a7ad8/580.png)