Garmin G2000 Pilots Guide - Page 64

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AAUUDDI&IOOCPN&ASCNENLS FLIGHT MANAGEMENT System Overview Selecting the audio alert voice: 1) From Home, touch Utilities > Setup > Avionics Settings. 2) If necessary, touch the Audio Tab. 3) Touch the Audio Alert Voice button (current voice displayed in light blue). 4) Touch the audio alert voice gender button to select an audio alert voice (Male or Female). Enabling/Disabling 3D audio for the Pilot or Copilot: 1) From Home, touch Utilities > Setup > Avionics Settings. 2) If necessary, touch the Audio Tab. 3) Scroll to and touch either the Pilot 3D Audio or Copilot 3D Audio Enable Button. 3D audio is enabled when button annunciator is green, disabled when gray. Changing the location of the left and right audio for the 3D audio feature: 1) From Home, touch Utilities > Setup > Avionics Settings. 2) If necessary, touch the Audio Tab. 3) Scroll to and touch either the Pilot L-R Swap or Copilot L-R Swap Enable Button. When enabled, the audio normally heard in the left headset channel is heard in the right headset channel. Environmental Control Settings The G2000 offers a control interface for the Environmental Control System (ECS) through the ECS Screen on the Touchscreen Controller. The ECS Screen allows control of cabin temperature control, fan speed settings, and windscreen defogging. Enabling/Disabling ECS: 1) From the Home, touch Aircraft Systems > ECS. 2) Touch the ECS ON Button. A green annunciator indicates ECS is enabled as shown in Figure 1-34. A gray annunciator indicates ECS is disabled. Enable/Disable ECS Enable/Disable Windscreen Defogging Enable/Disable Air-Conditioning Figure 1-34 ECS Screen Cabin Temperature Adjustment Set Fan to Automatic or Manual Manual Fan Speed Adjustment HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 50 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A