Garmin G2000 Pilots Guide - Page 94
FMS CDI SCALING, Changing the selected GPS CDI setting, Setup, Avionics Settings, System, GPS CDI
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS Flight Instruments FMS CDI Scaling When FMS is the selected navigation source, the flight plan legs are sequenced automatically and annunciations appear on the HSI for the flight phase. Flight phase annunciations are normally shown in magenta, but when cautionary conditions exist the color changes to yellow. If the current leg in the flight plan is a heading leg, 'HDG LEG' is annunciated in magenta beneath the aircraft symbol. The current GPS CDI scale setting is displayed on the GTC Avionics Settings Screen and the full-scale deflection setting may also be changed on this screen. If the selected scaling is smaller than the automatic setting for enroute and terminal phases, the CDI is scaled accordingly and the selected setting is displayed rather than the flight phase annunciation. Changing the selected GPS CDI setting: 1) From the Home Screen, touch Setup > Avionics Settings. 2) Touch the System Tab. 3) Touch the GPS CDI Data Field. 4) Touch desired setting (2.00 NM, 1.00 NM, 0.30 NM, or AUTO). EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES Figure 2-25 GPS CDI Settings When set to 'Auto' (default), the GPS CDI scale automatically adjusts to the desired limits based upon the current phase of flight (Figure 2-26, Table 2-1). 80 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A INDEX