Garmin G2000 Pilots Guide - Page 505

SYSTEM OVERVIEW FLIGHT INSTRUMENTS Additional Features Chart Selection When a flight plan is active, or when flying direct-to a destination, the initial set of charts made available pertain to the departure airport. After departing the airport environment, the initial chart set made available pertains to the destination airport. When no flight plan is active, or when not flying to a direct-to destination, the initial chart set is made available for the nearest airport. Selecting Charts using the Charts Screen: 1) From the Home Screen, touch Charts. 2) The airport for which charts will be displayed is shown at the top of the Charts Screen. Touch the Airport Button to enter another airport. 3) Touch the Info Tab to display the airport information selection buttons for the selected airport (Figure 8-7). • Departure Tab to display a list of possible departures for the selected airport. • Arrival Tab to display a list of possible arrivals for the selected airport. • Approach Tab to display a list of possible approaches for the selected airport. 4) Touch the desired information button in any of these lists to display the applicable chart on the MFD. EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE HAZARD AFCS ADDITIONAL FEATURES APPENDICES Figure 8-7 Airport Diagram Selection Figure 8-8 Airport Diagram View Options 5) Touch the Charts Options Button to select the desired display option for the selected chart (Figure 8-8). 6) Touch All to display the complete Airport Diagram. Fit Width displays the full width of the Airport Diagram. Plan displays only the diagram portion of the chart. Minimums displays only the approach minimums on an approach chart. Profile displays only the descent profile on the approach chart. Header displays the chart heading. Only appropriate views are available for the selected chart. 7) Touch Back to return to the Charts Screen. 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 491 INDEX