Garmin G2000 Pilots Guide - Page 134

SyStem oVerVieW fligHt inStrUmentS eiS & cnS aUdio panel aVoidance management engine indication SyStem engine lean aSSiSt mode NOTE: Consult the Airplane Flight Manual (AFM) for leaning procedures. The Engine Lean Assist Mode is accessed using the Touchscreen Controller. While the Lean Assist Mode is active, the system indicates the peak of each TIT on the EIS display with a light blue bar which remains at the peak Turbo Inlet Temperature. Readouts below each TIT gauge indicate the difference between each peak TIT and the current temperature. An indicator below the readout shows whether each TIT is operating 'LEAN' or 'RICH' of peak TIT. Enabling/Disabling lean assist Mode: 1) From home, touch aircraft Systems. 2) Touch the lean assist Button. The button annunciator is green when Lean Assist Mode is enabled, annunciator is gray when disabled. Peak TIT Lean or Rich from Peak TIT Deviation from Peak Figure 3-23 Engine lean assist Mode (EIS Display) SUpplemental oXygen SyStem The Oxygen Button on the Touchscreen Controller enables or disables the supplemental oxygen system. Enabling/Disabling the Oxygen System: 1) From Home, touch aircraft Systems. 2) Touch the Oxygen Button. When the button annunciator is green, oxygen is enabled, annunciator is gray when disabled. fligHt HaZard afcS additional featUreS appendiceS indeX 120 Garmin G2000 Pilot's Guide for the cessna T240 190-01263-01 Rev. A