Garmin G2000 Pilots Guide - Page 303
Loading a departure into the active flight plan using the GDU Controller,
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS Departure Button Airport Button Transition Button Runway Button Preview Button Runway Selection Button Flight Management Departure Selection Button Transition Selection Button EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE HAZARD AFCS ADDITIONAL FEATURES Departure Sequence Loaded Departure Load Button Remove Button Figure 5-143 Loading a Departure into the Active Flight Plan Loading a departure into the active flight plan using the GDU Controller: 1) Press the PROC Key. The Procedures Window is displayed. 2) Highlight 'SELECT DEPARTURE'. 3) Press the ENT Key or the small PFD Knob. The Select Departure Window is displayed. 4) Use the PFD Knob to select an airport and press the ENT Key or the small PFD Knob. 5) Select a departure from the list and press the ENT Key or the small PFD Knob. 6) Select a runway (if required) and press the ENT Key or the small PFD Knob. 7) Select a transition (if required) and press the ENT Key or the small PFD Knob. 'LOAD?' is highlighted. 8) Press the ENT Key or the small PFD Knob to load the departure procedure. 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 289 APPENDICES INDEX