Garmin G2000 Pilots Guide - Page 282

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT Flight Management 6) Touch the Remove Departure Button, the Remove Arrival Button, or the Remove Approach Button. 7) Touch the OK Button in response to "Remove - from flight plan?" The procedure is removed (the departure airport remains when removing a departure). To cancel the request, touch the Cancel Button. Changing Flight Plan Comments (Names) The comment field (or name) of each flight plan can be changed to something that is useful for identification and sorting. Changing the active flight plan comment: 1) From Home, touch Flight Plan > Flight Plan Options 2) Touch the Rename Button to display the keypad. 3) Use the keypad to select the comment. 4) Touch the Enter Button to accept the comment, and and return to the Flight Plan Options Screen. Changing the active flight plan comment using the GDU Controller: 1) On the GDU Controller, press the FPL Button to display the Direct To Window. 2) Turn the large PFD Knob to move the cursor to the comment field, if necessary. 3) Turn the small PFD Knob one click to activate the editing cursor (flashing). 4) Turn the large and small PFD knobs to select the comment (large knob moves the cursor; small knob selects the character) 5) Press the ENT Key or the small PFD Knob to accept the selection. Changing a stored flight plan comment: 1) From Home, touch Flight Plan > Flight Plan Options 2) Touch the Catalog Button to display the Flight Plan Catalog Screen. 3) Scroll the list if necessary and touch a flight plan options button to display the Catalog Options Window. 4) Touch the Rename Button to display the keypad. 5) Use the keypad to select the comment. 6) Touch the Enter Button to accept the comment, and return to the Flight Plan Catalog Screen. Along Track Offsets A waypoint having an "along track offset" distance from an existing waypoint can be entered into a flight plan. Along track offset waypoints lie along the path of the existing flight plan, and can be used to make the system reach a specified altitude before or after reaching the specified flight plan waypoint. Offset distances can be entered from 1 to 999 nm in increments of 1 nm. Entering a negative offset distance results in an along track offset waypoint inserted before the selected waypoint, whereas entering a positive offset distance results in an along track offset waypoint inserted after the selected waypoint. Multiple offset waypoints are allowed. HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 268 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A