Garmin G2000 Pilots Guide - Page 518
Viewing FliteCharts database information, Utilities > Setup, Avionics Status, Database
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 518 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS & CNS AUDIO PANEL Additional Features Power-up Display Definition Blank Line. System is not configured for FliteCharts. Contact a Garminauthorized service center for configuration. System is configured for FliteCharts but no chart database is installed. Refer to Updating Garmin Databases in Appendix B for the FliteCharts database Normal operation. FliteCharts database is valid and within current cycle. FliteCharts database is beyond the expiration date, but still within the 180 day viewing period. FliteCharts database has timed out. Database is beyond 180 days after expiration date. FliteCharts database is no longer available for viewing. Table 8-3 FliteCharts Annunciations and Definitions 'FliteCharts Expires' plus a date in white, indicates the chart database is current. 'Chart data is out of date!' in yellow, indicates charts are still viewable, but approaching the disable date. When the 180 day grace period has expired, 'Chart data is disabled.' in yellow indicates that the FliteCharts database has expired and is no longer viewable. 'Chart Data: N/A' appears in white if no FliteCharts data is available on the database card or no database card is inserted. FliteCharts status information can be found on the MFD1, PFD1, and GTC1 Databases Screens (Figure 8-32). The 'Expires' date is the revision date for the next database cycle. The 'Expires' date appears in yellow when expired. FliteCharts becomes inoperative 180 days after the FliteCharts 'Expires' date is reached, and is no longer available for viewing. This date is shown as the 'Disables' date. When the disables date is attained, the date is displayed in yellow. Also, Charts Button on the Home Screen then appears subdued and is disabled until a new issue of FliteCharts is installed. Viewing FliteCharts database information: 1) From the Home Screen, touch Utilities > Setup > Avionics Status. 2) Touch the Database Tab. 3) Touch the button corresponding to the display (MFD1, PFD1, or GTC1) for which the database information will be viewed. AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX 504 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A