Garmin G2000 Pilots Guide - Page 163

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS Audio and CNS ADF/DME Tuning See the Flight Instruments Section for displaying the DME and bearing information windows (ADF) and using the ADF as the source for the bearing pointer. The system tunes the ADF receiver (optional) and DME transceiver (optional). The ADF is tuned by entering the frequency in the ADF standby frequency field of the Audio & Radios Screen on the Touchscreen Controller. The UHF DME frequency is tuned by pairing with a VHF NAV frequency. DME frequency pairing is automatic and only the VHF NAV frequency is shown. The following ADF/DME information is displayed on the Touchscreen Controller: • Active and standby ADF frequencies • ADF receiver mode • ADF receiver volume • DME tuning mode (DME transceiver pairing) • DME receiver volume ADF Volume Slider ADF1 Button DME1 Button DME Volume Slider ADF Control Button DME Control Button ADF Volume Knob Label Figure 4-30 ADF/DME Tuning ADF Frequency/Transfer Knob Label The selected ADF/DME volume level can be adjusted from 0 to 100% on the touchscreen controller by turning the middle knob or by sliding your finger right or left on the NAV volume slider. Turning the knob clockwise increases volume, turning the knob counterclockwise decreases volume. Sliding to the right increases volume, sliding to the left decreases volume. FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 149