Garmin G2000 Pilots Guide - Page 166

SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS Audio and CNS Selecting ADF Receiver Mode The following modes can be selected: (In all modes NDB audio can be heard by selecting the ADF1 Button on the Touchscreen Controller.) • ANT (Antenna) - The ADF bearing pointer parks on the HSI at 90 degrees. Best mode for listening to NDB audio. • ADF (Automatic Direction Finder) - The ADF pointer points to the relative bearing of the NDB station. • ADF/BFO (ADF/Beat Frequency Oscillator) - The ADF pointer points to the relative bearing of the NDB station and an audible tone confirms signal reception. This mode allows identification of the interrupted carrier beacon stations used in various parts of the world. • ANT/BFO (Antenna/Beat Frequency Oscillator) - The ADF bearing pointer parks on the HSI at 90 degrees while an audible tone is provided when a signal is received. This mode also allows identification of the interrupted carrier beacon stations and confirms signal reception. Selecting an ADF receiver mode: 1) Touch Audio & Radios to display the Audio & Radios Screen. 2) Scroll the list to find the ADF. 3) Touch the ADF control button to display the ADF Mode/Tuning Screen. 4) Touch the ANT, ADF, ADF/BFO, or ANT/BFO Button to select the ADF mode. ADF Mode Buttons Figure 4-34 ADF Mode Selection FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 152 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A