Garmin G2000 Pilots Guide - Page 314

Flight Management SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD ACTIVATE VECTORTO-FINAL Selected Activate Vectors To Final Button Touchscreen Controller - Procedures Screen PFD - Procedures Window Figure 5-150 Activating Vectors to Final on the Touchscreen Controller and on the PFD Removing an Approach from the Active Flight Plan When plans change while flying IFR, approaches can be easily removed from the Active Flight Plan. Removing an approach from the active flight plan using the Touchscreen Controller: 1) From Home, touch PROC 2) Touch the Approach Button to display the Arrival Selection Screen. 3) Touch the Remove Button. A 'Remove approach?' window is displayed. 4) Touch the Yes Button. The approach is removed from the active flight plan. To cancel the request, touch the No Button. Removing an approach from the active flight plan using the GDU Controller: 1) Press the FPL Key to display the Active Flight Plan Window on the PFD. 2) Press the PFD Knob, and turn to highlight the approach header in the active flight plan. 3) Press the CLR Key. A confirmation window is displayed listing the approach procedure. 4) With 'OK' highlighted, press the ENT Key or the small PFD Knob. To cancel the removal request, highlight 'CANCEL' and press the ENT Key or the smal PFD Knob. Missed Approach Activating a missed approach in the active flight plan: 1) From Home, touch PROC 2) Touch the Activate Missed Approach Button to activate the missed approach. The aircraft automatically sequences to the MAHP. Or: 1) Press the PROC Key on the GDU Controller. The Procedures Window is displayed on the PFD. 2) Highlight 'ACTIVATE MISSED APPROACH'. 3) Press the ENT Key or the small PFD Knob to activate the missed approach. The aircraft automatically sequences to the MAHP. 300 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A AFCS ADDITIONAL FEATURES APPENDICES INDEX