Garmin G2000 Pilots Guide - Page 340
Tracking the OPSHN to FSHER Leg, Awaiting Vectors to Final, After FSHER
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 340 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Flight Management 19) After passing OPSHN, the next leg of the arrival turns magenta as shown in Figure 5-198. The magenta arrow in the flight plan list now indicates the OPSHN to FSHER leg of the arrival procedure is now active. Figure 5-198 Tracking the OPSHN to FSHER Leg 20) The flight continues through the arrival procedure to FSHER (see Figure 5-199). At a point 31 nm from the destination airport, the phase of flight scaling for the CDI changes to Terminal Mode and is annunciated by displaying 'TERM' on the HSI. & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES INDEX Figure 5-199 Awaiting Vectors to Final After FSHER, you receive a radar vector to the final approach. Annunciations for the upcoming turn and descent, as well as the VDI and RVSI, appear on the PFD as the flight progresses. 326 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A