Garmin G2000 Pilots Guide - Page 309

Flight Management SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO PANEL & CNS FLIGHT MANAGEMENT AVOIDANCE HAZARD Loading an Approach into the Active Flight Plan Loading an approach into the active flight plan using the Touchscreen Controller: 1) From Home, touch PROC 2) Touch the Approach Button to display the Approach Selection Screen. 3) Select the airport and approach: a) If necessary, touch the Airport Button to display the keypad and use it to select the approach airport. b) Touch the Enter Button to accept the approach airport. c) If necessary, touch the Approach Button to display the Select Approach Screen with a list of available approaches. d) Scroll the list if necessary and touch an approach selection button to select the approach. Or: a) If the SBAS Button is available , touch the SBAS Button to display the keypad and use it to select the SBAS channel number (The SBAS channel button is only available when an LP, LPV, or no approach is selected). If the SBAS Button is not available , touch the Approach Button to display the Select Approach Screen, scroll to the bottom of the list, touch the Select by SBAS Channel Button to display the keypad, and use it to select the SBAS channel number b) Touch the Enter Button to accept the SBAS channel and return to the Approach Selection Screen with the airport and approach selected. 4) If necessary, touch the Transition Button to display the Select Transition Screen with a list of available transitions. 5) Scroll the list if necessary and touch a transition selection button to select the transition. 6) To set the minimums, touch the Minimums Button to display the Minimums Screen. If the minimums were Off, then Baro is automatically selected. a) If Baro is desired, use the keypad to select the barometric minimum altitude. b) Touch the Enter Button to accept the barometric minimum altitude and return to the Approach Selection Screen. Or: a) If temperature compensated minimum is desired, touch the Minimums Button to display the Minimums Source Window. b) Touch the Temp Comp Button to select temperature compensated minimums and return to the Minimums Screen. c) Use the numeric keypad to select the destination temperature. d) Touch the Enter Button to accept the destination temperature and return to the Minimums Screen. e) Use the keypad to select the minimums altitude. f) Touch the Enter Button to accept the temperature compensated minimums and return to the Approach Selection Screen. 7) Touch the Preview Button, then the Show on Map Button to show the preview of the approach. 8) Touch the Load Button to insert the approach into the active flight plan. 190-01263-01 Rev. A Garmin G2000 Pilot's Guide for the Cessna T240 295 AFCS ADDITIONAL FEATURES APPENDICES INDEX