Garmin G2000 Pilots Guide - Page 292
Activate Direct
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS Flight Management Creating a user-defined hold at a Direct To waypoint: 1) From Home, touch Flight Plan 2) Touch the Direct-To Button and set up the Direct To waypoint as desired. 3) Touch the Hold Button. The Direct To Hold Screen is displayed. 4) Touch the Turn Direction Button, and touch the Right Button or the Left Button to select the turn direction. 5) Touch the Course Direction Button, and touch the Inbound Button or the Outbound Button to select the course direction. 6) Touch the Hold Entry Course Button to display the keypad. Use the keypad and the Enter Button to select the entry angle. 7) Touch the Leg Length Mode Button, and touch the Distance Button or the Time Button to select the length mode. 8) Touch the Leg Time Button or the Leg Distance Button to display the keypad. Use the keypad and the Enter Button to select the length of the leg. 9) Touch the Expect Further Clearance Button to display the keypad. Use the keypad and the Enter Button to select the time for a reminder. 10) Touch the Enter Button to return to the Direct To Screen. 11) Touch the Activate Direct To Button to activate the Direct-To and add the hold into the flight plan. Direct To Button & CNS AUDIO PANEL AVOIDANCE MANAGEMENT FLIGHT HAZARD AFCS ADDITIONAL FEATURES APPENDICES Hold Button Course Direction Button (Inbound or Outbound) Turn Direction Button Hold at Present Position Button Hold Location Information Leg Length Mode Button (Time or Distance) Leg Time or Leg Distance Button Hold Entry Course Button Expect Further Clearance Button Cancel Hold Button Show on Map Button Figure 5-129 Creating a User Defined Holding Pattern at a Direct To Waypoint 278 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A INDEX