Garmin G2000 Pilots Guide - Page 154
Selecting a NAV frequency using the Touchscreen Controller, Audio & Radios, Enter,
View all Garmin G2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
SYSTEM OVERVIEW FLIGHT INSTRUMENTS EIS AUDIO & CNS Audio and CNS Selecting a NAV frequency using the Touchscreen Controller: 1) Touch the Audio & Radios Button to display the Audio & Radios Screen. 2) Touch the NAV1/NAV2 frequency button to select NAV1/NAV2 for tuning, and display the NAV1/NAV2 frequency tuning screen. 3) Use the keypad to select the desired frequency. 4) Touch the Enter Button to enter the new frequency as the NAV1/NAV2 standby frequency; or touch the XFER Button to enter the new frequency as the NAV1/NAV2 standby frequency and transfer it to the active frequency. Find Button XFER Button Figure 4-20 NAV Frequency Tuning Window Enter Button Knob function labels Or: 1) Touch the Audio & Radios Button to display the Audio & Radios Screen. 2) Touch the NAV1/NAV2 volume slider to select NAV1/NAV2 for tuning. 3) Turn the large and small right knobs to tune the frequency (Large knob increases/decreases MHz; Small knob increases/decreases kHz). 4) Press the small right knob to enter the new frequency as the NAV1/NAV2 standby frequency; or press and hold the small right knob to transfer the new standby frequency to the active frequency. FLIGHT MANAGEMENT HAZARD AVOIDANCE AFCS ADDITIONAL FEATURES APPENDICES INDEX 140 Garmin G2000 Pilot's Guide for the Cessna T240 190-01263-01 Rev. A