HP Xw6600 HP xw6600 Workstation Service and Technical Reference Guide - Page 103

Slide the SATA drive and mounting rails into the selected bay until it snaps into place.

Get HP Xw6600 - Workstation - 2 GB RAM PDF manuals and user guides
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

To install one or two SATA hard drives: 1. Disconnect power from the system (see Predisassembly procedures on page 52). 2. Remove the side access panel (see Side access panel on page 58). 3. Select a drive bay to install the SATA hard drive in, and remove the drive mounting rails from that slot. If a drive was originally removed from that slot, retrieve the mounting rails from the removed drive. 4. Install the hard drive body into a set of hard drive mounting rails, as shown in the following figure. Figure 4-51 Installing the hard drive body into the hard drive mounting rails 5. Slide the SATA drive and mounting rails into the selected bay until it snaps into place. 6. As shown in the following figure, attach the data (2) and power (1) cables to the SATA drive. Figure 4-52 Connecting the SATA cables to the SATA drive ENWW Removing and replacing components 93

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
To install one or two SATA hard drives:
1.
Disconnect power from the system (see
Predisassembly procedures
on page
52
).
2.
Remove the side access panel (see
Side access panel
on page
58
).
3.
Select a drive bay to install the SATA hard drive in, and remove the drive mounting rails from that
slot.
If a drive was originally removed from that slot, retrieve the mounting rails from the removed drive.
4.
Install the hard drive body into a set of hard drive mounting rails, as shown in the following figure.
Figure 4-51
Installing the hard drive body into the hard drive mounting rails
5.
Slide the SATA drive and mounting rails into the selected bay until it snaps into place.
6.
As shown in the following figure, attach the data (2) and power (1) cables to the SATA drive.
Figure 4-52
Connecting the SATA cables to the SATA drive
ENWW
Removing and replacing components
93