HP Xw6600 HP xw6600 Workstation Service and Technical Reference Guide - Page 106
Processor heatsink, Removing the processor heatsink
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
8. Connect the data cable to the hard drive and to the system board, as shown in the following figure. Figure 4-56 Connecting the data cable 9. Connect the power cable (not shown). 10. Reinstall the workstation side access panel. Processor heatsink This section describes how to remove and install a processor heatsink. Not all heatsinks are the same. The heatsink shown in the following figures is an example of what might be installed in your workstation. Removing the processor heatsink To remove a heatsink: 1. Power down the workstation (see Predisassembly procedures on page 52). 2. Disconnect power from the workstation (see Predisassembly procedures on page 52). 3. Remove the side access panel (see Side access panel on page 58). 96 Chapter 4 Removal and replacement procedures ENWW