HP Xw6600 HP xw6600 Workstation Service and Technical Reference Guide - Page 141
POST error messages - memory installation
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 141 highlights
Table 5-18 POST error messages (continued) Screen message Probable cause Recommended action 210-Mismatched memory (AMBs) detected Different memory module types are matched Ensure that compatible memory module types are used in matched pairs. 211-Memory warning condition detected Improper or defective memory module Replace the memory module. 212-Failed Processor Processor has failed to initialize. 1. Reseat the processor in its socket. 2. If the processor does not respond, replace it. 213-Incompatible Memory Modules A memory module in memory socket 1. Verify proper memory module type. identified in the error message is missing critical SPD information, or is 2. Insert the DIMM in another memory socket. incompatible with the chipset. 3. Replace module with a DIM conforming to the SPD standard. 214-DIMM Configuration Warning DIMMs are not installed correctly (not paired correctly) See the service label on the workstation access panel for the correct memory configurations, and reseat the DIMMs accordingly. 216-Memory Size Exceeds Maximum Supported The amount of memory installed exceeds that supported by the hardware 1. Verify how much memory your system supports. 2. Remove the excess memory. 301-Keyboard Error Keyboard failure. 1. Reconnect the keyboard with the workstation powered off. 2. Check the connector for bent or missing pins. 3. Be sure that none of the keys are pressed. 4. Replace the keyboard. 303-Keyboard Controller Error I/O board keyboard controller is defective or is not set properly 1. Reconnect the keyboard with workstation turned off. 2. Replace the system board. 304-Keyboard or System Unit Error Keyboard failure. 1. Reconnect the keyboard with workstation turned off. 2. Be sure that none of the keys are pressed. 3. Replace keyboard. 4. Replace system board. 510-Splash Screen image corrupted Splash Screen image has errors. Update system BIOS. 511-CPU. CPU A, or CPU B Fan is not connected or is defective Fan not detected 1. Reseat the fan cable. 2. Reseat the fan. 3. Replace the fan. 512-Chassis, rear chassis, or Fan is not connected, might have front chassis fan not detected malfunctioned. 1. Reseat the chassis, rear chassis, or front chassis fan cable. 2. Reseat the chassis, rear chassis, or front chassis fan. 3. Replace the chassis, rear chassis, or front chassis fan. 513-Memory fan not detected Missing or disconnected memory fan 1. Ensure the memory fan is installed. 2. Ensure proper memory fan connections. ENWW POST error messages 131