HP Xw6600 HP xw6600 Workstation Service and Technical Reference Guide - Page 90
PCI card support bracket, Removing a PCI card support bracket
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
CAUTION: To prevent possible equipment damage when installing a PCI card, overall power consumption of the system (including I/O cards, processor, and memory) must not exceed the maximum rating of the system power supply. PCI card support bracket Some PCI cards have retainers installed to prevent movement during shipping. Removing a PCI card support bracket To remove a PCI card support bracket: 1. Disconnect power from the system (see Predisassembly procedures on page 52). 2. Remove the side access panel (see Side access panel on page 58). 3. For short or tall PCI cards: a. Press in on the ribbed portion of the holder (1). b. Apply upward pressure on the lower arm (2). c. Rotate the support bracket out of the chassis, as shown: Figure 4-33 Removing a short PCI card support bracket 80 Chapter 4 Removal and replacement procedures ENWW