HP Xw6600 HP xw6600 Workstation Service and Technical Reference Guide - Page 68
Side access panel, WARNING
UPC - 883585731121
View all HP Xw6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
2. Remove the screw attaching the lock to the chassis, as shown: Figure 4-5 Removing the lock screws Side access panel Before accessing the internal components of the workstation, you must remove the side access panel. NOTE: If the optional solenoid hood lock is installed and activated, it must be deactivated prior to powering down the workstation and removing the side access panel. To remove the side access panel: WARNING! 1. Power off the workstation and disconnect the power cord from the electrical outlet. 2. Disconnect power from the system (see Predisassembly procedures on page 52). 3. If necessary, unlock the side access panel. The keys are on the rear panel. Also, unlock other locks that are present, such as a cable lock or padlock. 4. As shown in the following figure, pull up on the latch handle (1) and lift the cover off the workstation (2). Figure 4-6 Opening the side access panel 58 Chapter 4 Removal and replacement procedures ENWW