HP LaserJet 9040/9050 Service Manual - Page 147
PIU. See
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Note Transfer-guide assembly 1 Remove the following FRUs: • Right door. See page 105. • Back cover. See page 109. • Transfer-roller assembly. See page 120. • Tray 2 and tray 3. See page 121. • PIU. See page 126. • Registration assembly. See page 129. • Fuser assembly. See page 134. • Feed-drive assembly. See page 142. You do not need to remove the drum motor. 2 Remove two gold screws (callout 1) from the transfer-guide assembly. 3 Push in and release the two plastic tabs (callout 2) to the right of each screw. 4 Lift the transfer-guide assembly up, rotate it forward slightly, and then pull it out of the printer. 21 2 Figure 73. Transfer-guide assembly Right assemblies 131
Right assemblies
131
Transfer-guide assembly
1
Remove the following FRUs:
•
Right door. See page 105.
•
Back cover. See page 109.
•
Transfer-roller assembly. See page 120.
•
Tray 2 and tray 3. See page 121.
•
PIU. See page 126.
•
Registration assembly. See page 129.
•
Fuser assembly. See page 134.
•
Feed-drive assembly. See page 142.
Note
You do
not
need to remove the drum motor.
2
Remove two gold screws (callout 1) from the transfer-guide assembly.
3
Push in and release the two plastic tabs (callout 2) to the right of each screw.
4
Lift the transfer-guide assembly up, rotate it forward slightly, and then pull it out of the printer.
Figure 73.
Transfer-guide assembly
2
1
2
2