HP LaserJet 9040/9050 Service Manual - Page 234
To initialize NVRAM or perform a skip disk, NVRAM INIT, SKIP DISK, READY
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 234 highlights
Note Note To initialize NVRAM or perform a skip disk The model number, the serial number, the usage data, and the error event log information is retained when performing a disk initialization. 1 Turn off the printer. 2 Press and hold (the 9 button on MFPs). 3 Turn on the printer. 4 Release (the 9 button on MFPs). 5 Press (the 3 button on MFPs). 6 Press PAUSE/RESUME (START on MFPs). 7 Use (the 9 button on MFPs) or (the 3 button on MFPs) to scroll to the appropriate selection (NVRAM INIT or SKIP DISK). Other functions are available in this menu, but are not applicable. 8 Press (the 6 button on MFPs). The printer boot sequence is complete when READY appears on the control-panel display. 218 Chapter 7 Troubleshooting
218
Chapter 7 Troubleshooting
To initialize NVRAM or perform a skip disk
Note
The model number, the serial number, the usage data, and the error event log information is retained
when performing a disk initialization.
1
Turn off the printer.
2
Press and hold
(the 9 button on MFPs).
3
Turn on the printer.
4
Release
(the 9 button on MFPs).
5
Press
(the 3 button on MFPs).
6
Press
P
AUSE
/R
ESUME
(
S
TART
on MFPs).
7
Use
(the 9 button on MFPs) or
(the 3 button on MFPs) to scroll to the appropriate
selection (
NVRAM INIT
or
SKIP DISK
).
Note
Other functions are available in this menu, but are not applicable.
8
Press
(the 6 button on MFPs).
The printer boot sequence is complete when
READY
appears on the control-panel display.