HP LaserJet 9040/9050 Service Manual - Page 81
Fuser cleaning, Create a cleaning
View all HP LaserJet 9040/9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Note Fuser cleaning To complete internal cleaning, create and process a cleaning page. Create a cleaning page Generating a cleaning page cleans the excess toner off the pressure roller in the fuser. The page contains instructions that walk the customer through the process of inserting the page in a tray. If tray 1 is installed, the instructions indicate that the page should be placed face-down in tray 1. If tray 1 is not installed, the instructions indicate that the page be placed face-up in tray 2. The customer is then instructed to select the PROCESS CLEANING PAGE on the control panel. A sample cleaning page is shown below. While the cleaning page is printing, the display shows CREATING CLEANING PAGE. For best results, use copier-grade paper with a smooth surface and a weight of 64 to 90 g/m2 (17 to 24 lb). Do not use bond or rough paper. Create/print a cleaning page 1 Press to open the menus. 2 Press or to scroll to CONFIGURE DEVICE, and then press . 3 Press or to scroll to PRINT QUALITY, and then press . 4 Press or to scroll to CREATE CLEANING PAGE, and then press . 5 A cleaning page prints. Figure 20. Sample cleaning page Cleaning the printer and accessories 65