Netgear GS724Tv4 Software Administration Manual - Page 100

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Table 23. STP status information (continued) Field Max Age (secs) Forward Delay (secs) Hold TIme (secs) CST Regional Root CST Path Cost Description Specifies the bridge maximum age for CST. The value must be less than or equal to (2 X Bridge Forward Delay) - 1 and greater than or equal to 2 X (Bridge Hello Time +1). Derived value of the Root Port Bridge Forward Delay parameter. Minimum time between transmission of Configuration BPDUs. Priority and base MAC address of the CST regional root. Path Cost to the CST tree regional root. CST Configuration Use the CST Configuration screen to configure Common Spanning Tree (CST) and Internal Spanning Tree on the switch.  To configure CST settings: 1. Select Switching > STP > Advanced > CST Configuration. 2. Specify values for CST in the appropriate fields: • Bridge Priority. When switches or bridges are running STP, each is assigned a priority. After exchanging BPDUs, the switch with the lowest priority value becomes the root bridge. Specifies the bridge priority value for the Common and Internal Spanning Tree (CST). The valid range is 0-61440. The bridge priority is a multiple of 4096. If you specify a priority that is not a multiple of 4096, the priority is automatically set to the next lowest priority that is a multiple of 4096. For example, if the priority is attempted to be set to any value between 0 and 4095, it will be set to 0. The default priority is 32768. • Bridge Max Age (secs). Specify the bridge maximum age time for the Common and Internal Spanning Tree (CST), which indicates the amount of time in seconds a bridge waits before implementing a topological change. The valid range is 6-40, and the value must be less than or equal to (2 * Bridge Forward Delay) - 1 and greater than or equal to 2 * (Bridge Hello Time +1). The default value is 20. • Bridge Hello Time (secs). Specify the switch Hello time for the Common and Internal Spanning Tree (CST), which indicates the amount of time in seconds a root bridge waits between configuration messages. The value is fixed at 2 seconds. • Bridge Forward Delay (secs). Specify the switch forward delay time, which indicates the amount of time in seconds a bridge remains in a listening and learning state before forwarding packets. The value must be greater or equal to (Bridge Max Age / 2) + 1. The time range is from 4 seconds to 30 seconds. The default value is 15. • Spanning Tree Maximum Hops. Specify the maximum number of bridge hops the information for a particular CST instance can travel before being discarded. The valid range is 6-40 3. Click the Apply button. Configuring Switching 100