Netgear GS724Tv4 Software Administration Manual - Page 84

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches • LAG ID. The number assigned to the LAG. This field is read-only. • Link Trap. Specify whether you want to have a trap sent when link status changes. The factory default is Disable, which will cause the trap to be sent. • Admin Mode. Select Enable or Disable from the list. When the LAG (port channel) is disabled, no traffic will flow and LAGPDUs will be dropped, but the links that form the LAG (port channel) will not be released. The factory default is Enable. • STP Mode. Select the Spanning Tree Protocol administrative mode associated with the LAG. • LAG Type. Specify whether the LAG is configured as a static or LACP port. When the LAG is static, it does not transmit or process received LAGPDUs, for example the member ports do not transmit LAGPDUs and all the LAGPDUs it can receive are dropped. The default is Static. • Active Ports. A listing of the ports that are actively participating members of this port channel. A maximum of 8 ports can be assigned to a port channel. • LAG State. Indicates whether the link is Up or Down. • Local Preference Mode. Enable or disable the LAG interface's Local Preference mode. 4. Click the Apply button. Configuring Switching 84