Netgear GS724Tv4 Software Administration Manual - Page 43

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Table 6. Time Configuration status fields (continued) Field Description Last Attempt Status Specifies the status of the last SNTP request or unsolicited message for both unicast and broadcast modes. If no message has been received from a server, a status of Other is displayed. These values are appropriate for all operational modes: • Other. The status of the last request is unknown. • Success. The SNTP operation was successful, and the system time was updated. • Request Timed Out. After an SNTP request was sent to an SNTP server, the response timer expired before a response from the server was received. • Bad Date Encoded. The time provided by the SNTP server is not valid. • Version Not Supported. The SNTP version supported by the server is not compatible with the version supported by the client. • Server Unsynchronized. The SNTP server is not synchronized with its peers. This is indicated by the leap indicator field on the SNTP message. • Server Kiss Of Death. The SNTP server indicated that no further queries were to be sent to this server. This is indicated by a stratum field equal to 0 in a message received from a server. Server IP Address Specifies the IP address of the server for the last received valid packet. If no message has been received from any server, an empty string is shown. Address Type Specifies the address type of the SNTP server address for the last received valid packet. Server Stratum Specifies the claimed stratum of the server for the last received valid packet. Reference Clock Id Specifies the reference clock identifier of the server for the last received valid packet. Server Mode Specifies the mode of the server for the last received valid packet. Unicast Sever Max Specifies the maximum number of unicast server entries that can be configured Entries on this client. Unicast Server Current Entries Specifies the number of current valid unicast server entries configured for this client. Click Refresh to refresh the screen with the most current data from the switch. SNTP Server Configuration Use the SNTP Server Configuration screen to view and modify information for adding and modifying Simple Network Time Protocol SNTP servers.  To configure a new SNTP server: 1. Select System > Management > Time > SNTP Server Configuration. 2. From the Server Type list, select the type of SNTP address to enter in the Address field, which is either an IP address (IPv4) or hostname (DNS). 3. In the Address field, specify the IP address or the host name of the SNTP server. Configure System Information 43