Netgear GS724Tv4 Software Administration Manual - Page 192

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Access Control Access control allows you to configure a profile and set access rules. Access Profile Configuration Use the Access Profile Configuration screen to set up a security access profile.  To configure an access profile: 1. Select Security > Access > Access Control > Access Profile Configuration. 2. In the Access Profile Name field, specify the name of the access profile to be added. 3. Select one of the following options: • Activate Profile. Activate an access profile. • Deactivate Profile. Deactivate an access profile. • Remove Profile. Remove an access profile. The access profile should be deactivated before removing the access profile. 4. Click the Apply button. The following table describes the access profile status information and the profile summary information the screen displays. Table 60. Field Packets Filtered Profile Summary Rule Type Service Type Source IP Address Mask Priority Description The number of packets filtered. The action to be performed when the rules selected are matched. The policy is restricted by the management chosen from the list. Possible methods include HTTP, Secure HTTP (SSL), and SNMP. The Source IP Address of the client originating the management traffic. The Source IP Address Mask of the client originating the management traffic. The rule priority value. The rules are validated against the incoming management request in the ascending order of their priorities. If a rule matches, action is performed and subsequent rules below are ignored. For example, if a Source IP 10.10.10.10 is configured with priority 1 to permit, and Source IP 10.10.10.10 is configured with priority 2 to Deny, then access is permitted if the profile is active, and the second rule is ignored. Managing Device Security 192