Netgear GS724Tv4 Software Administration Manual - Page 13
Discover a Switch in a Network with a DHCP Server, Discover
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Discover a Switch in a Network with a DHCP Server This section describes how to set up your switch in a network that has a DHCP server. The DHCP client on the switch is enabled by default. When you connect it to your network, the DHCP server will automatically assign an IP address to your switch. Use the Smart Control Center to discover the IP address automatically assigned to the switch. To install the switch in a network with a DHCP server: 1. Connect the switch to a network with a DHCP server. 2. Power on the switch by connecting its power cord. 3. Install the Smart Control Center on your computer. 4. Start the Smart Control Center. 5. Click the Discover button for the Smart Control Center to find your switch. A screen similar to the one shown in the following figure displays. Getting Started 13