Netgear GS724Tv4 Software Administration Manual - Page 210
MAC ACL, To modify a rule, Apply, To remove a rule, Delete, To add a MAC ACL, Security
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 210 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches To modify a rule: 1. Select check box associated with the rule to remove. 2. Update the match criteria as needed. 3. Click the Apply button. To remove a rule: 1. Select check box associated with the rule to remove. 2. Click the Delete button. MAC ACL A MAC ACL consists of a set of rules which are matched sequentially against a packet. When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is taken and the additional rules are not checked for a match. There are multiple steps involved in defining a MAC ACL and applying it to the switch: 1. Create the ACL ID. See MAC ACL on page 210. 2. Create a MAC rule. See MAC Rules on page 211. 3. Associate the MAC ACL with one or more interfaces. See MAC Binding Configuration on page 213. To add a MAC ACL: 1. Select Security > Basic > MAC ACL. The MAC ACL table displays the number of ACLs currently configured in the switch and the maximum number of ACLs that can be configured. The current size is equal to the number of configured IPv4 ACLs plus the number of configured MAC ACLs. 2. In the Name field, specify a name for the MAC ACL. The name string can include alphabetic, numeric, dash, underscore, or space characters only. The name must start with an alphabetic character. 3. Click the Add button. Each configured ACL displays the following information: • Rules. The number of rules currently configured for the MAC ACL. • Direction. The direction of packet traffic affected by the MAC ACL, which can be Inbound or blank. To change the name of a MAC ACL: 1. Select the check box next to the Name field for the ACL to modify. 2. In the Name field, specify the new name. 3. Click the Apply button. Managing Device Security 210