Netgear GS724Tv4 Software Administration Manual - Page 121
Querier VLAN Configuration, Apply, To con MLD queriers, Switching, Multicast
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches 4. In the MLD Version field, the MLD protocol version used in periodic MLD queries is displayed. The supported MLD Version is 1. 5. In the Query Interval field, specify the time interval in seconds between periodic queries sent by the snooping querier. The Query Interval must be a value in the range of 1-1800 seconds. The default value is 60. 6. In the Querier Expiry Interval field, specify the time interval in seconds after which the last querier information is removed. The querier expiry Interval must be a value in the range of 60-300 seconds. The default value is 60. 7. Click the Apply button. Querier VLAN Configuration Use this screen to configure MLD queriers for use with VLANs on the network. To configure MLD queriers: 1. Select Switching > Multicast > MLD Snooping Querier > Querier VLAN Configuration. 2. In the VLAN ID field, specify the VLAN ID for which the MLD snooping querier is to be enabled. 3. From the Querier Election Participate Mode list, select the mode: • Disable. Upon seeing another querier of the same version in the VLAN, the snooping querier moves to the non-querier state. • Enable. The snooping querier participates in querier election, in which the least IP address operates as the querier in that VLAN. The other querier moves to non-querier state. 4. In the Querier VLAN Address field, specify the snooping querier IP address to be used as the source address in periodic MLD queries sent on the specified VLAN. 5. Click the Add button. Configuring Switching 121