Netgear GS724Tv4 Software Administration Manual - Page 122
To remove an MLD snooping querier configuration, Delete
View all Netgear GS724Tv4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches The following table describes the MLD snooping querier status information on the screen. Table 36. Field Description Operational State Specifies the operational state of the IGMP snooping querier on a VLAN: • Querier. The snooping switch is the querier in the VLAN. The snooping switch will send out periodic queries with a time interval equal to the configured querier query interval. If the snooping switch sees a better querier (numerically lower) in the VLAN, it moves to non-querier mode. • Non-Querier. The snooping switch is in non-querier mode in the VLAN. If the querier expiry interval timer expires, the snooping switch moves into querier mode. • Disabled. The snooping Querier is not operational on the VLAN. The Snooping Querier moves to disabled mode when MLD Snooping is not operational on the VLAN or when the querier address is not configured or the network management address is also not configured. Operational Version The MLD protocol version of the operational querier. Last Querier Address The IP address of the last querier from which a query was snooped on the VLAN. Last Querier Version The MLD protocol version of the last querier from which a query was snooped on the VLAN. Operational Max Response The maximum response time to be used in the queries that are Time sent by the snooping querier. To remove an MLD snooping querier configuration: 1. Select the check box next to each entry to remove. 2. Click the Delete button. Configuring Switching 122