Netgear GS724Tv4 Software Administration Manual - Page 73

GS716Tv3, GS724Tv4, and GS748Tv5 Smart Switches Persistent Configuration Use this screen to configure the persistent location of the DHCP snooping bindings database. The bindings database can be stored locally on the device or on a remote system somewhere else in the network. The device must be able to reach the IP address of the remote system to send bindings to a remote database.  To configure DHCP snooping persistent settings: 1. Select System > Services > DHCP Snooping > Persistent Configuration. 2. Specify where the DHCP snooping bindings database is located. • Local. The binding table will be stored locally on the switch. • Remote. The binding table will be stored on a remote TFTP server. If the database is stored on a remote server: a. Specify the IP address of the TFTP server. b. Specify the file name of the DHCP snooping bindings database in which the bindings are stored. 3. In the Write Delay field, specify the amount of time to wait between writing bindings information to persistent storage. The delay allows the device to collect as many entries as possible (new and removed) before writing them to the persistent file. 4. Click the Apply button. Configure System Information 73